We take a look at some of the things any golfer can do to increase greenside spin and start hitting short shots closer and stopping faster.

The post Where is it okay to miss? | Gear Questions You’re Afraid to Ask appeared first on Golf.

We take a look at some of the things any golfer can do to increase greenside spin and start hitting short shots closer and stopping faster.

The post Where is it okay to miss? | Gear Questions You’re Afraid to Ask appeared first on Golf.

Welcome to Gear Questions You’re Afraid to Ask, a GOLF.com series produced in partnership with Cleveland/Srixon Golf. This week we look at the sweetspot on your clubs and help you better understand the best places to miss it.

Where are the best places to miss with each club? — Brett M., California

Great question. In order to know where to miss, let’s first recognize that a miss-hit refers to striking the ball away from the clubhead’s center of percussion. A.k.a., the clubhead’s sweetspot, which is the spot on the clubface where the center of gravity is directly behind it, and coincidentally, the point on the clubface where the maximum transfer of energy takes place.

Also, we call it a sweetspot, but in actuality it’s a point, not a spot, where the horizontal and vertical center of gravity intersect behind the clubface. Furthermore, the clubface’s center of flexion, usually in the center of the face, is not always aligned with the spot where you want to make contact with the ball, especially with clubheads that have interchangeable weighting. More on this in a bit.

Equipment manufacturers call the sweetspot a sweetspot because they invest countless hours and dollars in research and development to minimize distance and accuracy loss around it. The newest drivers, woods, hybrids, and even irons show minimal distance and direction loss on slightly off-center strikes. Though the sweetspot becomes less forgiving the further you move from the center, today’s modern clubs are significantly more forgiving than what we used 20 years ago.

Anyway, back to your question. Let’s start with the driver and work our way to the putter:

All of our market picks are independently selected and curated by the editorial team. If you buy a linked product, GOLF.COM may earn a fee. Pricing may vary.

1 / 3

2 / 3

3 / 3

Cleveland RTX 6 ZipCore Wedge

$169.99-$189.99

Click through to purchase a new Cleveland wedge.

BUY NOW

Some drivers have hotspots

For drivers, some have a hotspot that produces the much desired low-spin/high-launch ballflight that better players prefer. When it’s not in the same location as the sweetspot, this hotspot is usually just above it and in some cases, even a little bit above and towards the toe. To reap the benefits of a hotspot over the sweetspot, it takes not only a proper clubface path but added speed. Faster swingers can hit it hard enough to make the reduction in ballspeed worth it for a higher and lower-spinning launch. Finally, adjusting the weighting of your clubhead will tweak the CG, meaning the sweetspot will move away from the spot where the clubface flexes the most. Otherwise, if you’re going to miss on the face with a driver, most models are more forgiving high in the toe and low towards the heel.

Hybrids require a descending blow

Many amateurs feel the need to lift the ball with a hybrid, but the right play is to descend into the ball and make a divot. This might mean striking the ball a little higher and more towards the center of the clubface. Also, hybrids tend to have relatively small and shallow clubfaces, so there’s not a lot of room to miss high or low on the face. If you’re going to miss, it might be better to nip it a little thin than to hit the ball with the top edge of the crown, causing pops ups and ugly scuffs on the clubhead. There’s also more room towards the toe than the heel to miss, especially when it comes to iron-shaped hybrids.

Iron sweetspot locations vary depending on shape

Many people assume that irons have sweetspots towards the center of the face, but that’s not always the case. Forged blades actually have CGs located closer to the hosel than cavity-back irons. Hollow-core irons might even have sweetspots more towards the toe. Despite the variance in sweetspots from left to right, relative to the height of the sweetspot, most irons have sweetspots a little lower on the face and not in the center like drivers or woods. Hitting down on the ball is key to better iron shots, but you are going to miss it, best to miss a little towards the toe and not the heel. Best to avoid the s-word at all costs.

Wedge technology is moving the sweetspot towards the center

Traditional blade-style wedges can sometimes have a sweetspot dangerously close to the hosel. However, equipment companies like Cleveland have pioneered new technologies to reposition the sweetspot more towards the middle of the face. For example, the RTX 6 ZipCore comes with a low-density material in the hosel of the wedge, effectively moving the sweetspot more towards the middle for easier shotmaking control and improved performance.

Missed putts are sometimes a good thing

Sometimes it’s okay to miss-hit a putt, especially if you have a downhill putt that you know will be hard to control the distance. In these extreme situations, intentionally missing the sweetspot out towards the toe is called a dead putt. Doing this will make the face open at impact, so be ready for that. Even if your direction suffers a little, knowing you can lag the ball somewhere near the hole when perched above it is a definite win thanks to the dead putt.

Want to overhaul your bag for 2023? Find a fitting location near you at GOLF’s affiliate company True Spec Golf. For more on the latest gear news and information, check out our latest Fully Equipped podcast below!

The post Where is it okay to miss? | Gear Questions You’re Afraid to Ask appeared first on Golf.